The resin softening process primarily removes hardness ions from water, particularly calcium ions and magnesium ions. This is achieved through a method called ion exchange.

During the resin softening process, resin beads are coated with sodium ions. When hard water passes through the resin bed, the calcium and magnesium ions in the water are attracted to the resin beads. These calcium and magnesium ions then replace the sodium ions on the resin beads.
As a result of this ion exchange process, the calcium and magnesium ions in the water are removed, effectively softening it.
Over time, the resin beads become saturated with calcium and magnesium ions and need to be regenerated. This is typically done by flushing a concentrated salt solution (brine) through the resin bed. The high concentration of sodium in the brine displaces the calcium and magnesium ions from the resin beads, effectively recharging the resin.
After the regeneration process is completed, the resin bed is backwashed to remove any remaining brine, and then it’s rinsed to ensure the water is free of excess sodium.
In summary, the resin softening process is primarily used to remove hardness ions from water, especially calcium and magnesium ions, thus softening the water and preventing scale buildup in pipes and appliances, improving the lathering of soaps, and increasing the efficiency of water heaters, among other benefits.
Contact No. 0415 725 920
Email:
ancpurewater@gmail.com
ancpurewater@outlook.com
Address: 2 Murndal Court, Berwick VIC, 3806